Serving San Tan Valley, AZ
Local contractor in 85142
In San Tan Valley, AZ 85142, the warm climate often leads to increased demand for efficient HVAC systems. We specialize in maintaining and repairing air conditioning units to ensure optimal performance during the hottest months. Recently, we helped a homeowner near the San Tan Mountains who was experiencing a burning smell from their indoor unit. Our technician discovered a smoking blower capacitor and promptly replaced it, while also recommending blower wheel cleaning and routine maintenance to enhance system longevity. With the combination of older homes and the desert heat, regular HVAC upkeep is essential for comfort and efficiency in our community.
Recent projects near 85142
Real work completed for homeowners in San Tan Valley and the surrounding areas.

Job in San Tan Valley
Called out for a burning smell, open indoor unit and 20mfd indoor blower capacitor was smoking. Replaced 20mfd cap with an 20mfd cap. Blower housing and blower wheel are dirty, let customer know that we do offer blower wheel cleanings as well as maintenance for indoor and outdoor units. 21 degree split on unit.

Job in San Tan Valley
Service Summary & Diagnostics During the system inspection, multiple installation and component failures were identified. At the thermostat, the wiring connections were found to be loose and incorrectly terminated. In the attic, the PVC drain fittings had never been glued, the suction line was missing critical insulation, and the secondary drain pan connection was completely broken. Additionally, the indoor blower motor was running continuously due to a stuck relay on the furnace control board. Finally, the system is an improper mismatch of equipment, consisting of a Bryant condenser, a Goodman evaporator coil, and a Trane furnace. These components are not engineered to operate together, which directly severely compromises system efficiency, leads to improper capacity matching, and increases the frequency of component breakdowns. Work Completed Corrected and re-terminated all thermostat wiring to ensure secure, proper connections. In the attic, the loose PVC drain joints were properly glued, and the missing suction line insulation was replaced to prevent condensation and thermal loss. The line set connections were also sealed tight at the evaporator coil. To address the stuck blower, the control board relay was tapped to temporarily disengage the contact and stop the continuous fan operation. Recommendations It is strongly recommended to replace the furnace control board to permanently resolve the sticking blower relay, as the temporary fix cannot guarantee long-term reliability. A new secondary drain pan must also be installed to replace the broken one and ensure proper overflow protection in the attic. Looking ahead, because this mismatched system is inherently inefficient and prone to frequent failures, replacing the equipment with a fully matched, properly engineered system should be considered to ensure long-term reliability and comfort.

A/C Maintenance Coil Restoration
An inefficient A/C system can lead to uncomfortable conditions and higher energy bills. We conducted thorough maintenance, focusing on coil restoration and a detailed inspection of the condenser. Our work ensured optimal performance and extended the lifespan of the air conditioning unit, providing the comfort the homeowner needed.

A/C Maintenance
We addressed the issue of a sinking condenser by installing a new condenser pad to provide a stable foundation. Both the indoor and outdoor units were leveled to ensure optimal performance. Additionally, we replaced the secondary drain pan and installed a float switch to prevent future drainage issues.

A/C Condensate Drain Line
When we identified that the A/C condensate drain line was backing up, we quickly assessed the situation. We cleared blockages, ensuring proper flow and preventing further water damage. Following the fix, we tested the system to confirm optimal performance. Our focus was on restoring efficient cooling while safeguarding the surrounding area.

Job in San Tan Valley
Inspected two split gas HVAC systems at the property. One system serves the front portion of the home, and the second system serves the rear of the home, including the master bedroom and remaining areas of the property. Tested temperature splits on both systems and found them to be within acceptable range for the equipment and current operating conditions. Checked overall airflow and found it to be generally good throughout most rooms. No major faults were detected at this time. The property cooled down quickly, and both systems appear to be operating well overall. Upon arrival, found the air filters to be extremely plugged. Removed the filters and left them on site so the real estate agent or property representatives can replace them. Advised that replacing the filters should be done promptly. Also noted that the condenser coils are slightly dirty and would benefit from a thorough cleaning as part of routine maintenance. One of the rear units is missing some suction line insulation, and replacement is recommended during maintenance as well. Advised customer that if they would like a full air balancing evaluation, it would require measuring CFM, room dimensions, and performing a load calculation to accurately assess each individual room. However, based on today’s inspection, airflow appears to be acceptable in most areas. Additionally, while inspecting the exterior equipment, observed a tankless water heater installed on the side of the home. Recommended performing a descaling flush if it has not been completed regularly, as part of proper maintenance for the unit. Recommended continued HVAC maintenance going forward, including condenser coil cleaning, filter replacement, and possibly duct cleaning, as the duct system likely has not been cleaned at this property. Overall, both systems are working well at this time.

A/C Maintenance & Inspection
An aging Carrier A/C unit was struggling to maintain optimal cooling in the home. We conducted a thorough maintenance check, replaced worn-out filters, and addressed refrigerant levels to restore efficiency and enhance performance, ensuring the unit operates smoothly for reliable comfort.

Job in San Tan Valley
During the inspection of three split-system heat pumps with air handlers in the attic, we identified a lack of necessary safety (float) switches, which should be installed to prevent potential water damage. Additionally, we found a defective capacitor that requires replacement to maintain system reliability. Overall, all systems were functional, aside from these issues.

HVAC Repair
A malfunctioning capacitor and a faulty fan motor were affecting the overall performance of the system. We promptly replaced both components, restoring functionality and ensuring optimal operation. This quick and effective repair helped enhance the system’s efficiency and reliability, providing the customer with peace of mind.
What San Tan Valley homeowners are saying
A 5★ average rating from 5 verified reviews.
Super awesome experience! Technician was super professional and courteous.
These guys were prompt and professional. Honest and no surprises. I would highly recommend them to anyone. Stoked to have found them.
Regan’s Heating & Air Company provided an exceptional experience. I contacted them for a comprehensive tune-up of my air conditioning unit prior to the commencement of summer. John Regan visited my residence and successfully serviced my air conditioning unit, while simultaneously elucidating the process to me. I am thoroughly satisfied with the service rendered and have opted to subscribe to their annual package, which includes two visits annually. I am highly impressed with this company’s expertise and would highly recommend their services. Thank you John
Fast and friendly service! Very easy to work with and communicate with. Everything was handled efficiently, and the job was done extremely well. Highly recommend!
Second time these guys have come through for me. Trustworthy, professional and knowledgeable. I have a kitchen again, thanks!
